Center of Applied Research and Nanotechnology (CARN) was started in Siddaganga Institute of Technology as an institute-wide integrated R&D and academic facility. This 1600 m2 area facility is located on the fourth floor of Sree Sivakumara Swamiji Centenary Building (TEQIP building). Center is established to carryout research to solve critical national problems in the field of Energy, Defence, Infrastructure, health and hygiene, and Engineering Education. The facility consists of clean rooms (Class 100 and Class 10000) and “non-clean room” area. The facility integrates three laboratories (Lab 1 for Nanoelectronics and Nanomaterials research; Lab 2 for Nanomaterials and Nanobiotechnology research; Modelling lab for simulation, modeling, and design activities), faculty offices, classrooms, research scholar’s room, a cafeteria and kitchen, and a reception area. The facility houses some of the indigenously designed laboratory tools, nanomaterials synthesis and characterization equipment, and a vast collection of software and books. SIT was one of the four self-supporting institutions to receive Rs. 5 crore to develop a Center of Excellence in Nanotechnology by TEQIP during its Phase-II funding (2013-2017).
Department of Nanotechnology initiated by the Center has designed an interdisciplinary two year M. Tech. program in Nanotechnology for BE/B. Tech. students from various engineering background. This program is been offered from the academic year 2014-15. To date about 22 students have graduated and are working at various industries/academic institutions.
| Center's Vison |
|---|
|
The vision of the Center is a national center of excellence in nanotechnology and advanced engineering research engaged in state-of-art applied research and engineering education of international standing. |
| Center's Mission |
|---|
|
To solve critical national problems in energy generation and distribution, defence, infrastructure, health, and hygiene through nano- and bio-engineering under five sub-themes: 1) Nano-electronics and nano-photonics, 2) nano-systems, MEMS and NEMS, 3) nano-bio sensors and nanobiotechnology, 4) advanced nano-materials, and 5) nano-technology education and marketing platforms. |
| ( ! ) Warning: include(./component/coadept/coabos.php): failed to open stream: No such file or directory in C:\wamp64\www\sit\html\department.php on line 489 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| ( ! ) Warning: include(): Failed opening './component/coadept/coabos.php' for inclusion (include_path='.;C:\php\pear') in C:\wamp64\www\sit\html\department.php on line 489 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| ( ! ) Warning: include(./component/coadept/coaboe.php): failed to open stream: No such file or directory in C:\wamp64\www\sit\html\department.php on line 599 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| ( ! ) Warning: include(): Failed opening './component/coadept/coaboe.php' for inclusion (include_path='.;C:\php\pear') in C:\wamp64\www\sit\html\department.php on line 599 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
|
Training: The Center also develops and undertakes a) short-term training and certification programs for undergraduate science or engineering students and faculty, b) continuing education programs for science and engineering faculty and industry professionals, and c) topical workshops in the thematic areas of nano-technology. |
|
Internships: Engineering students and industry personnel are offered summer internship opportunity to learn the operation of the Center's facility, get hands-on training in the various fabrication processes, undertake equipment maintenance, and contribute to the smooth functioning of the Center. This is also a path to contribute to the Center's R&D programs. Each internship carries a stipend and time-bound work assignments. Interested students should contact the Head of the Center. |
|
Visiting Scholars: The Center hosts visiting scholars from collaborating organizations on a case-by-case basis. Depending on the area of research interest, a scholar may be awarded this privilege for three months to two years. Certain rules and guidelines apply. Interested scholars should contact the Head of the Center. |
|
Workshops and Continuing Education (CE) Programs: Periodically, the Center hosts week-long workshops and continuing education programs for the S and E faculty and industry professionals. Participants live on campus for the duration and participate in the daily learning and laboratory activities. Topics pertain to the R&D themes of the Center: nano-electronics, nano-materials, or nano-medicine. Anyone interested in organizing a workshop or CE program should contact the Head of the Center. |
|
Center's Visitor Tours: Visitors are welcome to our facility. Visitors in a hurry may take the short window tours to obtain an overview of the facility. In-depth tours with clean room gowning, entry into the clean rooms, and participation in lab demonstrations are offered to high school and PUC student groups. Each group is limited to 15 members. Since the Center is an academic and research facility, all tour requests must be forwarded to Center's office so that they are scheduled without disturbing the ongoing activities. The entire facility is secured with biometric doors and no visitor can enter it without prior approval and arrangement. |
| ( ! ) Warning: include(./component/coadept/coagallery.php): failed to open stream: No such file or directory in C:\wamp64\www\sit\html\department.php on line 841 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| ( ! ) Warning: include(): Failed opening './component/coadept/coagallery.php' for inclusion (include_path='.;C:\php\pear') in C:\wamp64\www\sit\html\department.php on line 841 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| ( ! ) Warning: include(./component/coadept/coaschemasyllabus.php): failed to open stream: No such file or directory in C:\wamp64\www\sit\html\department.php on line 961 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| ( ! ) Warning: include(): Failed opening './component/coadept/coaschemasyllabus.php' for inclusion (include_path='.;C:\php\pear') in C:\wamp64\www\sit\html\department.php on line 961 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| ( ! ) Warning: include(./component/coadept/coapublications.php): failed to open stream: No such file or directory in C:\wamp64\www\sit\html\department.php on line 1082 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| ( ! ) Warning: include(): Failed opening './component/coadept/coapublications.php' for inclusion (include_path='.;C:\php\pear') in C:\wamp64\www\sit\html\department.php on line 1082 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| Research Project | Numbers |
|---|
| Research Scholars | Numbers |
|---|
| Patents Applied |
|---|
| 0 |
|
Center of Applied Research and Nanotechnology is an institute-wide engineering research and development center in 1600-m2 area, consisting of Class 100 and Class 10,000 clean-rooms, a modeling lab with software tools for modeling and designing nano- through bulk materials and devices, and integrated office and smart classroom spaces for PG students and research staff. SIT is one among the four self-financing institutions (out of total 30) in the country that was awarded Rs. five crores in 2013 by MHRD/TEQIP towards developing a Center of Excellence (CoE) in Nanotechnology within the Center with specific thrusts in building up the learning resources, faculty and student competence in advanced technologies, and nanotechnology centric collaborative engineering research and development infrastructure. |
| Laboratories |
|---|
Cleanrooms:
|
|
Modeling lab:
|
 Class 10000 (ISO 7) Cleanroom for Nano-electronics and Nano-materials Research |
|
Facilities Thermal evaporation system Thermal evaporation system uses physical vapor deposition method to deposit thin films of materials (in the range of a few nanometers to about a micrometer). Metals such as aluminum, silver, chromium, nickel, etc. may be evaporated using this system. Make and Model: Specification/Features:
High vacuum pump:
Ultimate vacuum:
No. of metal layers: Thickness monitor:
Applications: |
 Optical Microscope |
Microscopic examination are conducted to study the structure of the material under magnification. Make and Model: Specification/Features: Applications: Inclusions, grain boundary, and phase analysis This equipment is partly supported by Karnataka Council for Technological Upgradation, GoK. |
| Scanning Electron Microscopy (SEM)/EDX Analysis | |
|---|---|
Electron microscopy is performed at high magnifications, generates high-resolution images and precisely measures very small features and objects. Make and Model: JEOL JCM 6000Plus
Specification/Features::
Applications: Microanalysis and failure analysis of solid inorganic materials including metals and polymers; Qualitative determination of chemical compositions, crystalline structure and crystal orientations. The EDS detector separates the characteristic X-rays of different elements into an energy spectrum and EDS system software is used to analyse the energy spectrum in order to determine the abundance of specific elements. This equipment is partly supported by Karnataka Council for Technological Upgradation, GoK. |
 |
|
Micro-hardness tester Microhardness Testing is a method of determining a material’s hardness or resistance to penetration when test samples are very small or thin, or when small regions in a composite sample or plating are to be measured. Make and Model: Conation technologies, MMV-D Specification/Features:
Applications: Micro analysis examinations, such as surface contamination, carburization and decarburization, case depth and profiles, provide valuable information about the hardness of small samples and small areas of evaluation. This equipment is partly supported by Karnataka Council for Technological Upgradation, GoK |
 Optical Microscope |
|
Tensile strength testing Tensile Testing of Metals is a destructive test process that provides information about the tensile strength, yield strength and ductility of the material. Make and Model: Tinius Olsen, Model 50ST Specification/Features:
Applications: Tension, compression, flexure, shear tests for specimens in all sizes and shapes to a maximum force of 50 kN This equipment is partly supported by Karnataka Council for Technological Upgradation, GoK. |
 Thin film thickness measurement system |
Thin film thickness measurement system Non-destructive, non-contact, fast and accurate method of measuring film thickness by an optical technique. Make and Model: Specification/Features: Measurements:
Optical coating: dielectric filters, hardness coating, anti-reflection coating This equipment is partly supported by Karnataka Council for Technological Upgradation, GoK. |
UV-visible spectrometer UV-visible spectrometer is a nanomaterial characterization tool based on optical absorption/ transmission. The optical properties of nanoparticles dispersed in liquid are obatined through absorption spectra. Make and Model: Wavelength range: 190 – 1100 nm Spectral bandwidth: 1 nm (190-1100nm) Samples: Nanoparticles suspended in liquid, thin samples-films, filters Measurement modes: Spectrum, Kinetics, Photometrics ApplicationsSize and concentration of nanoparticles; surface plasmon resonance; band gap of semiconductor nanoparticles; optical characterization of thin samples-films, filters;
|
 UV-visible spectrometer |
 Surce Measure Unit |
Surce Measure Unit This equipment is used to source/sink current and voltage for electrical measurements on two terminal devices. Make and Model: Specification/Features: Voltage range: 20 mV – 200 V Current range: : 10 nA – 1 A Power:20 W Source and sink (four quadrant) operation Applications: DC Current voltage characterization of two terminal devices. Breakdown voltage measurement (up to 200 V)
|
Four point probe measurement This equipment is measures the sheet resistance of a thin film eliminating series resistance effects associated with the probes. Make and Model: Specification/Features: Measurement temperature – up to 200 ºC Current source down to 0 – 2 μA range (200 mA max.) Microvolt meter with 1 μV resolution Source and sink (four quadrant) operation ApplicationsSheet resistance of thin conducting/semiconducting films. Thickness/resistivity measurements of conducting/semiconducting films. |
 Four point probe measurement |
 High purity de-ionized water plant |
High purity de-ionized water plant High purity water that is free of all ionized minerals and salts, both organic and inorganic. The technical standard on the water quality is Type I as per ASTM international. Specification/Features: Resistivity (conductivity): up to 200 ºC Capacity: 200 litters per hour Storage tank: 1000 litters (stainless steel) Resistivity at storage tank: > 14 MΩ-cm ApplicationsSemiconductor wafer cleaning; laboratory chemistry; nanomaterials processing; any special cleaning. |
Polypropylene chemical hoods Chemical hoods are work benches with build-in exhaust to carry out experiments dealing with hazardous chemicals. Centre of ART has four chemical hoods, two located in Lab 1 and two in Lab 2 cleanrooms. Make and Model: Specification/Features: Dimensions 1830 x 915 x 800 mm3 (in Lab 1) 1326 x 915 x 580 mm3 (in Lab 2) Exhaust: 1200 CFM (in Lab 1) 1000 CFM (in Lab2) Utilities and tools: DI water, nitrogen, vacuum, hot plate with magnetic stirrer ApplicationsWafer cleaning; wet chemical processing; chemical synthesis |
 Polypropylene chemical hoods |
 Vacuum ovens |
Vacuum ovens Vacuum ovens are used for heat treatment of materials during processing. Center of ART houses two vacuum ovens located at the service chase of Lab 1. Make and Model: Specification/Features: Maximum Temperature: 250 ⁰C Pressure: 0.6 bar Ambient: Vacuum, air, or controlled gas (nitrogen, oxygen) Inner dimensions: 300 x 300 x 300 mm3 ApplicationsHeat treatment of materials in 0.6 bar to atmosphere in controlled or air ambient |
Simulation and modeling tools Cost intensive experiments limit the scope of various design verifications through actual implementation. Technology computer aided design and simulation helps in minimizing the cost incurred in design iteration. Center of ART houses a Modeling lab that contains 23 PCs and software worth Rs. 70 lakhs. Software list and application MedeA: Atomistic-scale simulation of materials using DFT (VASP) and molecular dynamics (LAMMPS), meso and micro scales using UNiversal CLuster Expansion for calculating thermal, mechanical, electronic and optical properties. COMSOL: Multiphysics simulation using Heat transfer, CFD, MEMS, Molecular flow, RF, and Optimization modules with Livelink to Solidworks. pSpice: Circuit simulation and PCB design Tanner L-Edit: IC Layout design tool Origin: Data analysis and visualization. Besides these, software with institute wide license such as, MATLAB, NI AWR Microwave Office, and Solid Works are also available at Center of ART. Besides these, software with institute wide licenses are also installed to strengthen the modeling work. |
|
Center provides following services to academia and industry.
Interested users may kindly contact Head Academic services: Training: Center develops and undertakes a) short-term training and certification programs for undergraduate science or engineering students and faculty, b) continuing education programs for science and engineering faculty and industry professionals, and c) topical workshops in the thematic areas of nano-technology. Workshops and Continuing Education (CE) Programs: Periodically, the Center hosts week-long workshops and continuing education programs for the S and E faculty and industry professionals. Participants live on campus for the duration and participate in the daily learning and laboratory activities. Topics pertain to the R&D themes of the Center: nano-electronics, nano-materials, or nano-medicine. Anyone interested in organizing a workshop or CE program should contact the Head of the Center. Center's Visitor Tours: Visitors are welcome to our facility. Visitors in a hurry may take the short window tours to obtain an overview of the facility. In-depth tours with clean room gowning, entry into the clean rooms, and participation in lab demonstrations are offered to high school and PUC student groups. Each group is limited to 15 members. Since the Center is an academic and research facility, all tour requests must be forwarded to Center's office so that they are scheduled without disturbing the ongoing activities. The entire facility is secured with biometric doors and no visitor can enter it without prior approval and arrangement. |
|
|
|
|---|
| ( ! ) Notice: Undefined variable: resgetassprofinfo in C:\wamp64\www\sit\html\component\placementdepartmentfacultyprofile.php on line 197 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| 2 | 0.0670 | 629160 | include( 'C:\wamp64\www\sit\html\component\placementdepartmentfacultyprofile.php ) | ...\department.php:1352 |
| ( ! ) Warning: mysqli_fetch_assoc() expects parameter 1 to be mysqli_result, null given in C:\wamp64\www\sit\html\component\placementdepartmentfacultyprofile.php on line 197 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| 2 | 0.0670 | 629160 | include( 'C:\wamp64\www\sit\html\component\placementdepartmentfacultyprofile.php ) | ...\department.php:1352 |
| 3 | 0.0684 | 729176 | mysqli_fetch_assoc( $result = NULL ) | ...\placementdepartmentfacultyprofile.php:197 |
| ( ! ) Notice: Undefined variable: resgetvisifacultyfinfo in C:\wamp64\www\sit\html\component\placementdepartmentfacultyprofile.php on line 345 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| 2 | 0.0670 | 629160 | include( 'C:\wamp64\www\sit\html\component\placementdepartmentfacultyprofile.php ) | ...\department.php:1352 |
| ( ! ) Warning: mysqli_fetch_assoc() expects parameter 1 to be mysqli_result, null given in C:\wamp64\www\sit\html\component\placementdepartmentfacultyprofile.php on line 345 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| 2 | 0.0670 | 629160 | include( 'C:\wamp64\www\sit\html\component\placementdepartmentfacultyprofile.php ) | ...\department.php:1352 |
| 3 | 0.0691 | 729176 | mysqli_fetch_assoc( $result = NULL ) | ...\placementdepartmentfacultyprofile.php:345 |
|
|
|
|---|
| . | |
|---|---|
| Dr. Nirankar Nath Mishra | |
| Assistant Proffessor | |
|
Professor Ph.D nirankar.mishra@sit.ac.in 0816 2214054 |
| ( ! ) Warning: include(./component/coadept/coaadvisoryboard.php): failed to open stream: No such file or directory in C:\wamp64\www\sit\html\department.php on line 1402 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| ( ! ) Warning: include(): Failed opening './component/coadept/coaadvisoryboard.php' for inclusion (include_path='.;C:\php\pear') in C:\wamp64\www\sit\html\department.php on line 1402 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| Rachana |
|---|
| The cultural festival organized at the Department level annually helps to develop the interaction between students of all the batches. On spot events like Formal -design oriented, Informal - Interactive and personality based and casual events are conducted to nurture the overall development of the students. Successful Practicing Architect from the field will be the chief guest for the event who shares their professional experience to motivate the students. |
| Annual Exhibition |
| Exhibition of the academic works of students during the previous year is organized at the Department annually. During this event, outstanding works of students are recognized with a certificate of appreciation. |
| Seminars |
| Eminent Architects with experience in various architectural genres are regularly invited for Guest Lecture and Seminars to the students at the at the Department level. Students get ample opportunity to interact with the filed experts. |
| ( ! ) Warning: include(./component/coadept/coaresearch.php): failed to open stream: No such file or directory in C:\wamp64\www\sit\html\department.php on line 1546 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| ( ! ) Warning: include(): Failed opening './component/coadept/coaresearch.php' for inclusion (include_path='.;C:\php\pear') in C:\wamp64\www\sit\html\department.php on line 1546 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| ( ! ) Warning: include(./component/coadept/coaacademics.php): failed to open stream: No such file or directory in C:\wamp64\www\sit\html\department.php on line 1562 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| ( ! ) Warning: include(): Failed opening './component/coadept/coaacademics.php' for inclusion (include_path='.;C:\php\pear') in C:\wamp64\www\sit\html\department.php on line 1562 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| ( ! ) Warning: include(./component/coadept/coacolloborations.php): failed to open stream: No such file or directory in C:\wamp64\www\sit\html\department.php on line 1579 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| ( ! ) Warning: include(): Failed opening './component/coadept/coacolloborations.php' for inclusion (include_path='.;C:\php\pear') in C:\wamp64\www\sit\html\department.php on line 1579 | ||||
|---|---|---|---|---|
| Call Stack | ||||
| # | Time | Memory | Function | Location |
| 1 | 0.0001 | 360824 | {main}( ) | ...\department.php:0 |
| Faculty Development Workshop Series |
|---|
|
Faculty Development Programme
|
| Special Lectures Organised in the Chemical Engineering Department |
|---|
|
Special Lecture
|
|
The department is recognized as research centre by VTU to offer MSc (Engg) and Ph.D. degrees. |
|---|
| Areas of Research |
|---|
|
| Research Groups |
|---|
|
| Civil Consultancy Work |
|---|
|
| Consultancy Details |
|---|
| Consultancy Details for 2020-21 |
| Project Report Guidelines Documents |
|---|
|
Students are informed to submit project report copy each to the concerned guide, project co-ordinator and department library and retain a copy with them. Major project report shall be hard binded (Gray color) and mini project report shall be spiral binded (transparent sheet in front and gray color sheet in back). |
|
Guidelines to prepare UG Project Report
|
The objective of COSMOS is to spread awareness about Free and Open Source Software (FOSS) among the students and leverage the power of FOSS to enhance the technical skills of students and mentored by Free Software Movement Karnataka. Several technical events and workshops are organized under this chapter Activities conducted under COSMOS are:
- One-day workshop on "how to build Virtual Reality enabled Web applications
- Hands on workshop on "how to use Git - a Distributed Version Control System
- 24-hour Hackathon
- Workshop on "how to build block chains and write smart contracts using the Ethereum platform
- Free Software Introduction Session - 1st September 2017
- Mozilla Web VR Camp - 7th October 2017
- Git Workshop - 8th March 2018
- Workshop on Block Chain and Ethereum by Mozilla Reps- 25thAugust 2018
- HackFest - 29thand 30th September 2018
Computer Society of India (CSI) student chapter was started at SIT during September 2011. All students of departments of CSE, ISE and MCA are members of this chapter.
Benefits and Advantages to CSI Student members
| Recognition: | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||
| Knowledge Enhancement: | ||||||||||||
|
||||||||||||
| CSI Publication: | ||||||||||||
|
||||||||||||
| Awards: | ||||||||||||
|
||||||||||||
| Networking: | ||||||||||||
|
||||||||||||
| Every academic year following activities are conducted under SIT-CSI chapter |
||||||||||||
| 1. CSI concentrics: | ||||||||||||
|
Following co-curricular activities are conducted: a. Debate b. Innovative project demonstration c. Pick and speak d. Online treasure hunt e. Application development f. Group discussion g. Hobby project demonstration |
||||||||||||
| 2. CSI Hackathon: | ||||||||||||
|
The objectives of hackathon are promoting creativity, collaboration, and innovative thinking.
Here students come up with novel solutions to particular problems, innovative ideas and
prototypes regarding new business opportunities. Hackathon is technology-driven and primarily
about software. It requires not only great technical and coding skills but also ideation and
presentation skills. Twelve hour or twenty-four-hour hackathon is conducted every
year. |
||||||||||||
| Activities organized under SIT - CSI student chapter for inter institute participants in last three years: | ||||||||||||
|
 |
| DeCoders the programming club of SIT is a club which functions under the incubation of the
Computer Science Department and every event conducted by DeCoders is directly or indirectly
intended to the betterment of the department. DeCoders mainly is a group of like-minded people
who have a nag for coding or developing technical solutions to challenging problems. Over the
past five years the club has conducted many technical events, seminars etc. The final year
members of the team frequently take sessions on programming mostly focusing on algorithmic
designs for their fellow team members. These sessions are not only restricted to the members of
DeCoders but anyone in the college willing to learn these things are always welcomed. DeCoders
also helps its members in developing new projects. The team generally takes a project and
members from all the years work on it to complete the project. This gives the members an
exposure to the product development environment and also helps them with their resume. Activities conducted under DeCoders club:
|
| S I G M A |
|---|
| Sigma is the newsletter of Computer Science and engineering department. It was started in the year of
2001. Team sigma was created to provide the students with updates and information about the latest
trends and technology in the domain of computer science.Sigma currently consists of 24 members. The
basic idea to form this group was to incorporate any upcoming or latest technology at one place and make
the students aware of all information and technology which is worth knowing for any student of a
computer science background.
Sigma team also conducts fun and interactive events for students for all years and all branches. It conducts a technical article writing contest for the students each year ,from which three write ups will be selected and published in the edition and will be awarded with cash prizes. |
| SECTIONS IN SIGMA |
Every edition includes different sections designed to provide specific information. They are:
|
| Recent Sigma Editions |
|
Sigma-2023 News Letter Sigma-2022 News Letter Sigma-2020 News Letter Sigma-2019 News Letter Sigma-2018 News Letter Sigma-2017 News Letter Sigma-2016 News Letter |
|
Hobby projects / Apps developed by the students |
| Click Here |
- volunteer and organize the events
- participate and showcase their research work
- work in teams
- communicate and collaborate with the students of other colleges
- get awareness of the outside world
- interact with the judges from other esteemed organizations
The following co-curricular and extra-curricular events are organized in BROWSE.
- Prasthuti (technical paper presentation)
- MindSnare (technical quiz)
- Life Extension (Gaming contest)
- Cyber Etymology (technical crossword)
- Byte Surge (programming contest)
- Photo Hunt (treasure hunt)
The conference was inaugurated on 15th December 2017 by Dr. S S Iyengar, Ryder Professor and Director, School of Computing and Information Sciences, Florida International University, Miami, USA. During his inaugural address, he stressed on India becoming developed country and expressed the need for interdisciplinary research quoting examples in the domain of medical and naval applications. He expressed his concern over Indian scientists not in the list of Nobel Laureates in the recent years, and appreciated that Bangalore is identified as a Global Information Technology hub. He urged all the participants to think of interdisciplinary problems and come up with novel solutions useful to society. He also listed domains like Artificial Intelligence, Cloud Computing, Forensic Analysis, Data Fusion, Image Processing, Internet of Things, Pattern Recognition which the researchers can choose, work and make India great.
Sri Srinivas Ramanujam, Academic Relationship Manager, Tata Consultancy Services, Bengaluru, expressed that talent in all the institutions requires to be nurtured for the progress of the country. Sri Bindu Madhava B S, Associate Director, Real Time Systems and Smart Grid, CDAC, Bengaluru, during his address highlighted the top ten technologies identified by IEEE for the year 2018.
Dr. M N Channabasappa, Director, SIT, Tumakuru presided over the function and addressed the gathering about the importance of presenting technical papers in international conferences. Dr. Shivakumaraiah, Principal, SIT, expressed that interdisciplinary conferences need to be organized which will initiate the collaborative research work across the departments.
Dr. R Sumathi, Head of the Department of Computer Science and Engineering., Dr. R Aparna, Head of the Department of Information Science and Engineering. Dr. N R Sunitha, Professor in Department of Computer science and Engineering. were present during the function.
Renowned technologists from academia and industry have delivered keynote address on the latest developments in the field of computation and information technologies. Dr. Rajan M A from TCS spoke on "Block Chain Technology and its Applications", Dr. S S Iyengar delivered a keynote address on "Artificial Intelligence and Deep learning in Software Development" and Dr. Athithan G from DRDO addressed R&D challenges in cyber security during his keynote talk. The key note address on 15th and 16th was followed by paper presentation sessions. About 50 researchers all over India presented their research work in the areas of computing, database, networking and security. All the accepted and presented papers will be published in IEEE Explorer.
| Student Chapters |
|---|
| Details of Institutional Chapters and activities under it International Society of Automation |
| 1. Year of starting the section in the department-2001 2. Name of the Faculty advisor-Dr.H.M Kalpana 3. Number of student members for the academic year 2018--43 |
| The International Society of Automation (www.isa.org) is a nonprofit professional association that sets the standard for those who apply engineering and technology to improve the management, safety, and cyber security of modern automation and control systems used across industry and critical infrastructure. Founded in 1945, ISA develops widely used global standards; certifies industry professionals; provides education and training; pubtdshes books and technical articles; hosts conferences and exhibits; and provides networking and career development programs for its 40,000 members and 400,000 customers around the world. ISA owns Automation.com, a leading ontdne pubtdsher of automation-related content, and is the founding sponsor of The Automation Federation (www.automationfederation.org), an association of non-profit organizations serving as "The Voice of Automation." Through a wholly owned subsidiary, ISA bridges the gap between standards and their implementation with the ISA Security Comptdance Institute (www.isasecure.org) and the ISA Wireless Comptdance Institute (www.isa100wci.org). |
| Activities conducted under the above chapter during 2017-18 National Symposium - iACT 2018 conducted on 25.02.2018 Technical Quiz, Paper Presentation, Robo Rash and Project Exhibition competitions were conducted and 95 students from nine colleges in and around Karnataka were participated. |
| Exhibited the Project "Attendant Robot for Bed Ridden Patients" in the Project Exhibition Anveshana organized by Agasthya Foundations and Synopsis, Bangalore and National Science day exhibition organized by KSCST, held at IISc, Bangalore. |
| IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY (IEEE-EMBS)TUMAKURU STUDENT CHAPTER. |
| ACTIVITIES: Visit arranged to NIMHANS Bangalore on the occasion of National Science day which observed the display of various Biomedical instruments. A guest Lecture was arranged by Dr.N Sriram, Professor & Head, Department of Medical Electronics, MSRIT, Bangalore on thy topic 'Engineering in Medicine and biology: Scope and Challenges. |
| Students Activities |
|---|
| Activity Detail |
| Innovative method adapted |
|---|
| Usage of ICT tools |
| Invited Special Lectures Delivered In The Department By The Scholars (FROM 1.4.2010 TO 31.3.2011) |
|---|
| Invited Special Lectures |
| List of Bridge courses conducted |
|---|
| List of Bridge courses |
| Name of the laboratory | Equipments available |
|---|---|
| Digital Electronics and Circuits Laboratory |
image |
| Digital Signal Processing Laboratory |
image |
| Electronic Devices and Circuit\DCCS Laboratory |
image |
| Embedded System Laboratory |
image |
| Linear Integrated Circuits Laboratory |
image |
| M.Tech Lab |
image |
| Process Automation Labouratory |
image image |
| Process Instrumentation Labouratory |
image |
| Thin Film Research Centre |
image image image |
| Project lab |
image image |
| VHDL Laboratory |
image |
Digital Electronics and Circuits Laboratory
Digital Signal Processing Laboratory
Electronic Devices and Circuit\DCCS Laboratory
Embedded System Laboratory
Linear Integrated Circuits Laboratory
M.Tech Laboratory
Process Automation Labouratory
Process Instrumentation Labouratory
Thin Film Research Centre
Thin Film Research Centre
Thin Film Research Centre
Thin Film Research Centre
Project Laboratory
Project Laboratory
VHDL Laboratory
| Project Details |
|---|
| Best Mini-Project and Major-Project Detail |
| Student Funded Projects |
|---|
| Student Funded Projects |
|
Proctor Students List-2024-2025 Proctor Students List-2022-2023 Proctor Students List-2021-2022 Proctor Students List-2020-2021 Proctor Students List-2019-2020 |
| Year | Student Name | USN |
|---|---|---|
| 2011 | Umang Kotriwal | 1SI07IS055 |
| 2012 | AkanchaSinha | 1SI08IS001 |
| 2013 | Mithesh Kumar | 1SI09IS021 |
| 2014 | Vanitha H | 1SI10IS056 |
| 2015 | Deepu H N | 1SI11IS018 |
| 2016 | Preetham G | 1SI12IS030 |
| 2017 | Kajol R | 1SI13IS023 |
| 2018 | Sindhupriya M A | 1SI14IS048 |
 |
|
Auto Architects is the All Terrain Vehicle Design and fabrication team of Siddaganga Institute of Technology, Tumakuru. The team has been working under the guidance of Dr.Umashankar since 2008, and has participated in various ATV Design and Design Innovation contests across the country and recognized by various organizations and conglomerates. In 2010, Auto Architects participated for the first time in BAJA SAE INDIA, held at Pithampur, Madhya Pradesh and secured 38th position across India.In 2012 stood 37th among 180 teams. Adding to the journey in 2016 the team cleared all the technical tests and successfully ran the vehicle in the endurance event. Presenty the team is working under |
|
Faculty Advisors : Mr. Guruchannabasavaiah and Mr. Naresh Captain : Prateek Pallav, Vice Captain : Saket Raj This year the team has cleared Virtual round for BAJA SAE India 2018,and secured 34th position all over India among 389 teams and 3rd in Karnataka. Determined and passionate students are fabricating the buggy for dynamic round with the vision to be the best i.e. Main BAJA SAE INDIA which is scheduled in January / February 2018. Click here to follow us on Instagarm A team of automobile enthusiasts from SIT,Tumkur, designing & fabricating ATVs for BAJA SAE. Affiliation Society of Automotive Engineers, India(SAE India), BAJA SAE INDIA, SIT SAE COLLEGIATE CLUB, Siddaganaga Institute of Technology, Tumakuru. |
 |
 |
 |
|
Team Adrenaline Racing history began in the year 2010, since then the team members have worked hard to evolve and create a stronger presence at competitions every year. Team’s main goal is to improve the performance and achieve better results and it believes that there is always room for improvement and do whatever to accomplish thee mission. The team consist of 25 students guided by our faculties, worked together and successfully fabricated open wheeled Formula Racing Car. It started and completed designing process of the 6th car in the month of December, 2017. Fabrication was soon started in January,2018 and it was able to finish it in the month of March, 2018. Testing and setting up of the car was done during the month of April, 2018. The team participated in SUPRA SAEINDIA 2018 which was held in Buddh International Circuit, Greater Noida from 11th June to 16th June 2018 and secured 3rd rank in Karnataka and 42nd rank out of 126 teams in India. We were able to achieve it under the guidance of Dr. H Shivashankar, Associate Professor, Mr. Ekanthappa J, Assistant Professor and Mr. Omkaresh B R, Assistant Professor. Contact: teamadrenalineracing2015[at]gmail.com The team has received lots of appreciation in the design that was presented at the event. |
 Team members: Amit Kumar, Nikhil Shenoi, Shreyas S, Rishabh Srivastava, Shaurya Prasad Shahi, Goutham Shenoy M, Musthafeez Muheeb Ahmed, Mohammed Zabiulla, Mohith N Kumar, Pavan S N, Manikanta Gowda B, Kumar Swamy H S, Manu L, Pranav K S, Abhinav S, Sai Tarun B V, Sohan K, Mrinal Raj, Aniket Singh. |
 |
 |
 |
|
Soaring Eagles is the aero design team of Siddaganga Institute of Technology, Tumakuru built with passion for aircrafts and Aero-Modeling. The team has participated in various aero design and design innovations contests, both nationally and internationally and recognized by various organizations and conglomerates. The team is completely committed towards the development of aerial vehicles and soar greater heights as the tagline goes “SOAR HIGH”. The basic motto of the team is to generate interest among the students to fabricate, innovate and develop aircraft model and analyze them to get a hands on experience of the technology advancements of this era. Initially started with radio controlled aircrafts, the team now is also doing work in the field of multirotors, hovercrafts and water rockets. Every year the team recruits new members, mostly from first and second year of engineering of all the branches, who have a keen interest in this wonderful field of Aeronautics and Aerodynamics. Dr. Shivasiddaramaiah A G, Assistant Professor, Mechanical Engineering Department, guides the team and motivates it to always come up with new innovative ideas and achieve greater success as the faculty advisor. Some of the achievements of the team are:
|
 |
 |
 |
|
FIRING PISTON Firing piston is the Go-kart Vehicle Design and fabrication team of Siddaganga Institute of Technology, Tumakuru. The team has been working under the guidance of Mr. Vijaykumar Hiremath since 2018 and has participated in various Go-kart Design and Design Innovation contests across the country and recognized by various organizations and conglomerates. In 2015, the team named as “Team Dragon Racing”, participated for the first time in “Indian Karting League” (Vayuputhra motorsports) held in Bangalore and has secured 6th position in the competition. In 2018 this team, reinitiated as “FIRING PISTON”, took part in International Go-kart Championship, LPU, Punjab and stood 33rd among 45 teams. VISION: To apply the concepts of technical knowledge in development of an automobile Presently the team is working under Faculty Advisor: Mr. Vijaykumar Hiremath Founders: Sachin Hosmane S (Ex member of team dragon racing), Arunabha Majumder, Aditya Mohan Naik. Facebook link: click here
|
TEAM INVICTUS Team Invictus is energy efficient human cum electrically powered three wheeled vehicle Design and fabrication team of Siddaganga Institute of Technology, Tumakuru. The basic motto of the team is to generate interest among the students to fabricate, innovate and develop energy efficient vechicles and analyze them to get a hands on experience of the technology advancements of this era. The vehicle must be aerodynamically, highly engineered and ergonomically designed. The team is going to participate in SAE NIS EFFICYCLE, 2018, LPU, Punjab, India. Presently the team is working under Faculty Advisor: Mr. Vijaykumar Hiremath Founders: Sehran Imam, Ritesh Kumar Singh Facebook link: click here |
 |
 |
 |
 |
 |
|
ISTE Students Chapter of SIT,Organize PROJECT EXHIBITION FOR THE YEAR 2018-19 Siddaganga Institute of Technology, Tumkur is one of the premier engineering institute in INDIA with an NIRF ranking of 79 for the 2019 , organized a project exhibition of final and pre final year engineering students of the institute in association with ISTE Students Chapter of SIT, Tumkur. In this exhibition, Forty five selected projects from all the departments were showcased on a single platform. The exhibition was open for the public and students of high schools and PU colleges of Tumkur. The exhibition was arranged in the basketball court of SIT campus. The exhibition was inaugurated by Dr. Karisiddappa, Vice- Chancellor of VTU, at 11.00 am, on 22nd April .2019. Best project awards were given in the category final and pre final year projects after evaluation of each project by an expert committee comprising two expert academicians. |
 Team members: Amit Kumar, Nikhil Shenoi, Shreyas S, Rishabh Srivastava, Shaurya Prasad Shahi, Goutham Shenoy M, Musthafeez Muheeb Ahmed, Mohammed Zabiulla, Mohith N Kumar, Pavan S N, Manikanta Gowda B, Kumar Swamy H S, Manu L, Pranav K S, Abhinav S, Sai Tarun B V, Sohan K, Mrinal Raj, Aniket Singh. |
 |
 |
Instructional Material
Instructional Material Developed by the departmental faculty members
Dr. K C Narasimhamurthy
| Students Testimonials |
|---|
| Collaborations |
|---|
Currently Center of ART is pursuing/developing collaborations with a number of academic institutes and industry organizations engaged in R&D in nanotechnology and related areas. Organizations interested in collaborative work may contact the Head of the Center. |
|
|
Currently Center of ART is pursuing/developing collaborations with a number of academic institutes and industry organizations engaged in R&D in nanotechnology and related areas. Organizations interested in collaborative work may contact the Head of the Center. |
|
Dr. Madhu Chennabasappa Assistant Professor Department of Physics channabasappa.madhu@gmail.com Research Interest/Work Materials for energy applications: battery materials, magnetocaloric materials, neutron and synchrotron diffraction, photocatalytic materials. |
|
Dr. Shridhar P. Mundinamani Assistant Professor Department of Physics mpshridhar@sit.ac.in Research Interest/Work Nanostructured materials and devices for energy storage and conversion applications. |
| Research in Diagnostics |
|---|
|
Center of ART has streamlined its R&D activities along nanomaterials, nanoelectronics, and nanomedicine towards solving the problems associated with energy, defense, infrastructure, health and hygiene and engineering education. The current research interests/activities of the Center of ART are as follows. |
|